NEC Xen IPK Features & Specifications Manual page 586

Phone system

Hide thumbs Also See for Xen IPK:

Table of Contents

Class of Service (Station) Feature Selection 2

Station to Class of Service Feature Assignment

SLT Data Line Security Assignment

Restrictions

Tone Override can be accomplished only after receiving a call waiting

An attempt to Tone Override a Multiline Terminal may be denied for the

following reasons:

The Multiline Terminal is set in the Do Not Disturb (DND) mode.

Auto Redial is activated.

During Station Programming.

The Multiline Terminal is denied the ability to receive a Tone

Another station is already sending a Tone Override to this station.

Account Code Entry is activated.

One Tone Override at a time can be received at a Multiline Terminal.

This Tone Override is heard over the handset and speaker (if the

receiving party is off-hook with the handset).

If a Multiline Terminal is assigned for Data Line Security, a Tone

Override is not heard over the handset; however, the Tone Override is

sent and heard from the speaker when the Multiline Terminal user is

off-hook with the handset.

Tone Override is allowed from a Single Line Telephone until the PBR

times out (default: 10 seconds).

If Tone Override is used from a Dial Pulse Single Line Telephone,

default Access Code

System Data Name

NEC Business Solutions Ltd

must be changed to a numerical digit.

Tone Override