NEC Xen IPK Features & Specifications Manual page 186

July 2003
176 – C11
Restrictions
A maximum of 24 digits, including pauses can be stored as the
destination outside number. (The Trunk Access Code is not counted as
part of the 24-digit number.)
When Call Forward - Busy/No Answer is set, the caller hears ringback
tone until a trunk becomes available. If an outside line is not available,
DIT/ANA calls are not forwarded, these calls remain at the station
setting the Call Forward - Off-Premise until a line becomes available.
Even when Call Forward - Off-Premise is set, Recall, Trunk
Queuing, and Automatic Callback calls directed to the extension line
are not forwarded.
The Call Forward destination number cannot be routed by Least Cost
Routing or by Automatic Carrier Routing.
General
Features like Code restriction, or forced account codes that are
enabled for the Call forward - Off-Premise extension apply to any call
that follows Call forward - Off-Premise.
The Feature key LED flashes red when Call Forward - Off-Premise (All
Calls) is set from a Multiline Terminal.
The ACD/UCD overflow destination station can be set to Call Forward
- Off-Premise.
The Access Codes for Call Forward set and cancel can be
programmed on Feature Access keys or One-Touch keys. If the key is
pressed during the conversation with an internal or outside party, the
call is placed on hold and the Access code is dialled.
If a Call Forward On/Off key (All or Busy/No Answer) is programmed
on the line key via System Programming, set/cancel toggles. The
Trunk Access Code and destination outside number need to be dialled
after pressing this key when setting Call Forward-Off-Premise.
Incoming calls from a voice mail system follows the Call Forward - Off-
Premise setting.
A Call Arrival key (CAR) number can be set for Call Forward - Off-
Premise.
The Speed Dial number cannot be set as the destination
forward number.
If the system is installed in the Key Function (KF) mode, a Specified
Line Seizure Access Code must be used when setting Call Forward -
Off-Premise.
The following incoming calls can be forwarded:
CO/PBX Transferred Call
Ordinary Incoming Internal Call
Direct Inward Termination (DIT)
Assigned Night Answer (ANA)
NEC Business Solutions Ltd
Call Forward - Off-Premise