NEC Xen IPK Features & Specifications Manual page 520

Phone system

Hide thumbs Also See for Xen IPK:

Table of Contents

To transfer an outside call or internal call with a call in progress:

Press the hookswitch momentarily, and receive internal dial tone.

Dial the station number where call is to be transferred.

To access feature:

Lift the handset, and receive internal dial tone.

Dial the Feature Access Code.

Data Assignment

All Feature Access Codes can be used from a Single Line Telephone if

allowed by Station Class of Service.

Internal and outside calls may be held and transferred by pressing the

hookswitch. This is determined in System Programming. The

choices are:

1. Press hookswitch for internal hold.

2. Press hookswitch to send a Hookflash to the outside line.

If a rotary type Single Line Telephone is used, Access Codes using #

must be changed to numerical digits because this

telephone does not support these digits.

Restrictions

The SLT(1)-U( ) ADP and OPX(2)-U( ) ETU do not support the

Message Waiting feature.

Single Line Telephones provide a distinctive ringing pattern between

CO/PBX incoming calls and internal calls.

Both DTMF type and Rotary type Single Line Telephones can be used

with the system.

Message Wait LEDs light if a message is sent to a Single Line

Telephone with Message Wait LED.

A Single Line Telephone can be used to voice announce to a Multiline

Default Access Code 6# can be used to send a hookflash from a

Single Line Telephone to an outside line.

NEC Business Solutions Ltd

Single Line Telephone Access