Account Code - Forced/Unverified - NEC Xen IPK Features & Specifications Manual

Account Code -
Forced/Unverified
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURE
Features and Specifications Manual
The Forced/Unverified Account Code feature forces the user to dial an
access code and an Account Code before being able to select an outside
line, but the account code entered is not verified against a list of stored
numbers (as it is in the Forced/Verified Account Code feature). This in effect
means that any number (of a specified length) can be entered without being
restricted to a certain selection only. The Account Code entered is then
presented in the SMDR report at the end of the call for account keeping or
identification purposes.
Terminal Type
All Terminals
Required Components
MIFM-U( ) ETU
To enter a Forced/Unverified Account Code from any station:
1. Lift the handset and wait for internal dial tone.
2. Dial the Forced Account Access Code. A second dial tone is received.
3. Dial the Forced/Unverified Account Code. Wait for internal dial tone.
4. Dial the Trunk Access code and the outside number.
To use this feature with Scrolling Directories:
V
1. Press the (SYS. or STA softkey) to designate system or station
speed dialling.
V
2. Press the (UP or DOWN softkey) to view the names/numbers
listed in the directory.
Press a dial pad key (to select the first letter of the name or number of
the desired speed dial buffer) and dial
3. To dial the number press
4. Enter the Account Code.
- OR -
J
.
P
or lift the handset.
A-2
A2 – 15