NEC Xen IPK Features & Specifications Manual page 187

Xen IPK
RELATED
FEATURES LIST
Features and Specifications Manual
Direct Inward Dialling (DID)
Tie Line
Automated Attendant (AA)
If the outside party, where the call is forwarded, is busy or does not
answer, the call is terminated when the calling party hangs up.
If the station is set for Call Forward - All calls and an outgoing outside
line is not available, the DID/Tie internal call is not forwarded. The
calling party hears a busy tone.
When an ISDN/Tie/DID call is forwarded from an outside line to
another outside line, pad control is applied according to the
System Data assigned on Memory Block 3-31 (Trunk External
Transmit Pad Selection) and Memory Block 3-32 (Trunk External
Receive Pad Selection).
After a call has been forwarded to an outside line, the call is
disconnected when the Tandem Transfer Automatic Disconnect Timer
has expired.
An alert tone is provided to both the calling party and to the destination
outside party one minute before the Tandem Transfer Automatic
Disconnect Time runs out.
An outgoing call is charged to the internal calling party even if the
destination outside party does not answer or is busy when printed via
Station Message Detail Recording (SMDR).
The destination number is output through SMDR as the call record for
the station setting Call Forward - Off-Premise. When incoming
outside calls are received, 999 is printed on the report. When incoming
internal calls are received, the station number of the calling party is
printed on the report.
Call Forward Split feature allows internal calls and external call be
forwarded differently.
Feature
Number
A-25 Automatic Redial
C-7 Caller ID - Outgoing
C-8 Call Forward - All Calls
C-9 Call Forward - Busy/No Answer
C-19 Code Restriction
C-12 Call Forward - Split
S-1 Save and Repeat
Features and Specifications Manual
Feature Name
C11 – 177