Answer Key - NEC Xen IPK Features & Specifications Manual

Answer Key

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Multiline Terminals are equipped with an Answer key and associated LED.
The Answer key LED flashes when the Multiline Terminal user receives an
incoming CO/PBX, Tie/DID transferred, and CO/PBX transferred call
ringing/or not ringing in the same tenant group. When multiple calls are
received, the Answer key is used to pick up calls. The Answer key
continues flashing until the last unanswered call is answered. Press the
Answer key during a call to hold the current call and allow the next call to be
answered.
Terminal Type
All Multiline Terminals.
Required Components
None.
To answer calls using the Answer key:
1. Receive CO/PBX incoming ring or flashing MW lamp without ringing.
O
LED flashes.
O
2. Press . The
3. Talk with the CO/PBX incoming calling party.
4. If additional CO incoming calls are received, the
O
again. Press
and connect the Multiline Terminal user to the next call.
a. If the original call was on a Call Appearance Key, the call is placed
on Non-Exclusive Hold on the Call Appearance Key.
b. If the call was on a line key, the call is placed on Non-Exclusive
Hold on the line key.
Restrictions
Internal calls, internal transfer/camp-on calls, Secondary Incoming
Extension, Automated Attendant, and Tie/DID calls do not activate the
Answer key LED.
O
LED goes out.
to place the current call on Non-Exclusive Hold
A-9
O
LED flashes
A9 – 37