Trunk-To-Trunk Transfer - NEC Xen IPK Features & Specifications Manual

Trunk-to-Trunk Transfer

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Trunk-to-Trunk Transfer feature allows any station user to establish
Trunk-to-Trunk Transfers between two CO/PBX (disconnect signal must be
provided), ISDN, DID, and/or E&M Tie line calls.
Terminal Type
All Multiline Terminals.
Required Components
None.
On Multiline Terminals with an outside call in progress:
N
1. Press , and receive internal dial tone.
2. Dial the Trunk Access Code (either CO/PBX line, ISDN, DID, or E&M
Tie line) for desired trunk or press outside line key appearance.
T
3. Press .
N
4. Press to establish a Trunk-to-Trunk connection.
5. Hang up.
Data Assignment
This feature can be allowed or denied per trunk.
Restrictions
Single Line Telephone cannot be used for Trunk-to-Trunk Transfer.
General
All lines used for Trunk-to-Trunk Transfers must be able to provide
remote disconnect supervision.
A conference circuit is not required for a Trunk-to-Trunk Transfer.
Station users cannot reenter a Trunk-to-Trunk Transfer after the
connection is established.
If a Trunk Transfer is established using Call Appearance Keys, they
are free when the transfer occurs.
T-6
T6 – 583