NEC Xen IPK Features & Specifications Manual page 344

July 2003
SERVICE
CONDITIONS
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
HFU Selection
+BTM
When the system is at default this Memory Block must be programmed for the feature to be used.
334 – F7
General
One Override can be received during handsfree conversation.
The microphone must be ON to answer calls handsfree.
A Flexible Line key can be assigned as a MIC ON/OFF key, or a One-
Touch key can be programmed as a Microphone Control key.
While engaged on an outside line conversation using the built-in
Handsfree Operation feature, the conversation may be interrupted
(half-duplex) if both parties speak simultaneously.
Allow or Deny Full Handsfree Operation is determined, per station, via
System Programming.
During a conversation, the MIC ON/OFF key can be used to mute the
microphone.
Monitoring volume can be adjusted using the volume control on the
Multiline Terminal.
When a Multiline Terminal user lifts the handset, the monitoring
condition is automatically released, and the Speaker LED goes off.
The built-in Speakerphone is a half-duplex speaker phone. Noisy or
poor acoustical environments have a large impact on the speaker
phone switching from transmit to receive calls and vice versa.
System Data Name
NEC Business Solutions Ltd
Memory
Function
Block
4-29
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
Full Handsfree Operation