Direct Inward Termination (Dit - NEC Xen IPK Features & Specifications Manual

Direct Inward Termination
(DIT)
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Direct Inward Termination (DIT) allows CO/PBX lines to be programmed to
ring directly at stations (bypassing the Attendant). A separate Assigned
Night Answer (ANA) ringing assignment is available. A System or Tenant
group can be set to the Night Mode independently.
Terminal Type
All terminals.
Required Components
None.
No manual operation is required.
Data Assignment
CO/PBX lines can be assigned to ring a station number, a hunt group
master number, or an ACD/UCD Pilot number.
Multiple CO/PBX lines can be assigned to ring at the same station,
hunt group master number, or ACD/UCD Pilot number.
Separate Day/Night Mode DIT assignments can be programmed in the
system. The ANA feature provides the Night Mode DIT assignment.
Incoming DIT calls follow the station Call Forward setting.
Restrictions
Incoming DIT calls cannot be answered directly at the CO line key
appearance. The CO line key indicates Other Use (red LED).
A DIT call does not activate External Tone Ringer or Night Chime.
General
When an idle station programmed for DIT receives an incoming DIT
call, internal ring tone is heard at the station(s) where a Secondary
Incoming Extension is assigned to ring.
DIT incoming ringing is assigned for Distinctive Ring or Synchronous
Ring system-wide.
D-10
D10 – 269