NEC Xen IPK Features & Specifications Manual page 83

Xen IPK
Features and Specifications Manual
To answer by One Level:
1. Receive an incoming CO/PBX call.
2. The Automated Attendant answers the call and sends a greeting.
3. A DTMF tone is received. (Each tone is assigned to a station number
or a station hunt group.)
4. The call is transferred to a designated station or station hunt group.
5. The called party answers and talks.
To answer by Multiple Levels (up to eight levels are available):
1. Receive an incoming CO/PBX call.
2. The Automated Attendant answers the call and sends a greeting.
3. A 1-digit DTMF tone is received. (Each tone is assigned to another
message on the VRS ETU).
4. The call is answered by the VRS ETU and another message
is played.
5. A 1-, 2-, or 3-digit DTMF signal is received.
6. The call is transferred to a designated station of the second level, or
another VRS ETU message is played.
7. The called party answers and talks.
Timeout - No Answer :
1. An incoming CO/PBX call is received on a line.
2. The Automated Attendant answers the call and sends a greeting.
3. A 1-digit DTMF tone is received.
4. The call is transferred to a designated station or Station Hunt group.
5. If there is no answer, the CO/PBX ringing transfer at the station is
changed to an ordinary CO/PBX ringing call on the CO/PBX line, after
a predetermined time.
6. The calling party on the CO/PBX line is answered.
Features and Specifications Manual
A18 – 73