Attendant Add-On Console Transfer/Camp-On Recall Timer Selection - NEC Xen IPK Programming Manual

Xen IPK
Attendant Add-On Console
Transfer/Camp-On Recall
Timer Selection
General Description
Use this Memory Block to specify the time interval before a Ring Transfer or Station Camp-On
from a station with an Attendant Add-On Console recalls back to the originating station if the call
is not answered.
This memory block is removed with IPK R2000 and above.
Display
Data
No.
6 4 : D S S
T I M E
Settings
LK 1 LK 2
0.5 min. 1 min.
LK 5 LK 6
3 min. 5 min.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 + FD
3 Press the corresponding CO/PBX line key to change the data option.
N
4 Press to write the data.
P
Press to go back on-line.
5
Related Programming
M.B. Number
1-1-11 System Transfer/Camp-On Selection
1-1-12 Station Transfer/Camp-On Recall Timer Selection
1-6-00 Attendant Add-On Console to Telephone Port Assignment
1-8-08 Class of Service (Station) Feature Selection 2
N
1. When a station without an assigned Attendant Add-On Console transfers or camps-on a call to a station that goes
unanswered, the call recalls using Memory Block 1-1-12 Station Transfer/Camp-On Recall Timer Selection.
2. Timer is valid only for stations assigned an Attendant Add-On Console in Memory Block 1-6-00 Attendant Add-On
Console to Telephone Port Assignment. The

1-1-64, Attendant Add-On Console Transfer/Camp-On Recall Timer Selection

Title Setting
1~7 Data
R E C L 1 . 0
D I S P L A Y
LK 3 LK 4
1.5 min. 2 min.
The shaded area indicates
the default setting.
LK 7 LK 8
8 min. 10 min.
to access the Memory Block.
Memory Block Name
N
key on the station and the console are both affected.
Programming Manual
1-1-64
System Mode
1
Submode
1
Data No.
64
PC Programming
+ BM
DRAFT 3
Chapter 1 – 105