NEC Xen IPK Features & Specifications Manual page 312

July 2003
SERVICE
CONDITIONS
302 - E2
To change the station ringing volume:
1. Go off-hook by pressing
2. Dial Access Code
3. Dial from the dial pad.
A
M
4. Press ( = higher) or (
^
ringing volume.
5. Go on-hook.
To set the handset receiver volume:
1. Go off-hook with the handset.
M
2. Press ( = higher) or (
^
receiver volume.
To set the speaker volume:
1. Go off-hook by pressing
M
2. Press ( = higher) or (
^
volume.
3. Go on-hook.
- OR -
While using the speakerphone, press
to adjust the volume.
Data Assignment
Depending on System Programming, it is possible to retain the last
handset receiver volume set by the station user, per station.
Single Line Telephone users can also have their handset volume
increased by 6 dB in System Programming.
General
LCD contrast, off-hook ringing volume, station ringing volume, and
speaker volume adjustments are saved in system memory.
P
.
(default).
F0
= lower) during ringing to increase/decrease
v
= lower) to increase/decrease handset
v
P
.
= lower) to increase/decrease speaker
v
M
NEC Business Solutions Ltd
( = higher) or ( = lower) key
^
v
Electronic Volume Control