Push Button Dial - Dtmf Or Dp - NEC Xen IPK Features & Specifications Manual

Push Button Dial -
DTMF or DP
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Card Interface Slot Assignment
+BS
Features and Specifications Manual
The Push Button Dial - DTMF or DP feature is provided on all Single Line
Telephones and outside lines. Tie Lines are assigned per trunk to generate
either Dual-Tone Multifrequency (DTMF) or Dial Pulse (DP) dialling signals.
Terminal Type
All terminals with a push button dial pad.
Required Components
TLI(2)-U( ) ETU
Not applicable.
DTMF or DP programming is per Tie line trunk.
Single Line Telephones that are installed can be Push Button DTMF or
DP (rotary dial).
Default assigns DTMF signalling to all trunks and Single Line
Telephone ports.
DTMF tone can be sent from Multiline Terminals to Dial Pulse trunks.
System Data Name
Memory
Function
Block
7-1
P-11
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
P11 – 473