One-Touch/Feature Access Key - NEC Xen IPK Features & Specifications Manual

One-Touch/Feature
Access Key
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
One-Touch/Feature Access Keys are provided with Multiline Terminals to
allow a Multiline Terminal user to press a single, flexible Feature Access key
or One-Touch key to access many system features, System/Station Speed
Dial or Direct Station Selection without going off-hook first.
Terminal Type
All Multiline Terminals.
Required Components
None.
Refer to Related Features for the Operating Procedures:
Restrictions
Feature Access keys and One-Touch keys are similar in purpose and
capability. Up to 16 feature access keys are available depending on
system programming and available Line keys. One-Touch key
availability is controlled by the type of Multiline Terminal.
General
You can press a single key to call a station, access a Speed Dial
buffer, or activate a feature.
When the MIC key is programmed on a One-Touch or Feature Access
Key, set/cancel is operated by toggle.
Trunk access can be programmed on a Feature Access or
One-Touch key.
The following quantities of Feature Access Keys and One-Touch Keys
are available on each Multiline Terminal. BLF LED indication is
provided on each key, each for the One-Touch Keys of the ETW-24S-
1A (SW) TEL. The number of Feature Access Keys available depends
on the number of Line Keys and Single On/Off Keys assigned in
System Programming.
O-3
O3 – 447