NEC Xen IPK Features & Specifications Manual page 136

July 2003
SERVICE
CONDITIONS
126 – B6
To program the One-Touch key for DSS/BLF:
T
1. Press .
Q
2. Press .
3. Press the One-Touch key.
4. Dial .
A
5. Dial the station number.
6. Dial (optional step, toggles call between voice and tone).
A
T
7. Press .
Data Assignment
System Speed Dial (100 mode) must be assigned in System
Programming to enable programming line keys as Feature Access
keys. The user can then assign Feature Access keys as DSS/
BLF keys.
General
A single colour LED (red only) is used to indicate the following
station status:
LED is Flashing:
LED is Winking:
LED On:
LED Off:
Local power is not required for the BLF function on a Multiline
Terminal. The Attendant Add-On Console requires an AC transformer
that is provided with the console.
Assignment of One-Touch keys for Direct Station Selection (DSS) with
busy lamp indications is programmable by the user from the Multiline
Terminal. Any existing station can be assigned.
NEC Business Solutions Ltd
Station is in Do Not Disturb (DND) or Call Forward
- All Calls, Break Mode.
Station is Off-Line (to program). Station is
accessing FNC features.
Station is busy, receiving Voice Announcement,
receiving Internal/DIT/ANA/TIE/DID ringing signal,
or was put on hold.
Station is idle, receiving CO/PB call, receiving CO/
PBX transferred call, or receiving recall.
Busy Lamp Field on Multiline Terminals