Multiline Conference Bridge - NEC Xen IPK Features & Specifications Manual

Multiline Conference
Bridge
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OEPRATING
PROCEDURES
Features and Specifications Manual
The Multiline Conference Bridge allows any intercom or outside caller to
call the CNF(8)-U( ) ETU to place a multiparty conference call. Each
CNF(8)-U( ) ETU supports one 8-party conference or two 4-party
conferences regulated by a switch setting. Up to two CNF(8)-U( ) ETUs
may be installed. DSP based amplification provides a higher quality
conference call.
Terminal Type
All Terminals.
Required Components
CNF(8)-U( ) ETU
To set the Supervisor Password:
1. Call the Conference Bridge extension number and wait for the voice
prompt.
2. Dial the default Supervisor Password (
3. Follow the voice prompt, and enter the setting verification mode
L
( ). Then enter system set mode.
4. Follow the voice prompt to change Supervisor Password (4~8 digits).
To set the Conference 1 and/or Conference 2 Password:
1. Call the Conference Bridge extension number and wait for the
voice prompt.
2. Dial the default Supervisor Password (
3. Skip the steps until Conference Setup mode is available for
conference 1 or conference 2.
4. Follow the voice prompt and set the conference 1 or the conference 2
password (4~8 digits).
M-3
KKKK
), then
KKKK
), then
M3 – 411
L
.
L
.