Account Code - Forced/Verified - NEC Xen IPK Features & Specifications Manual

Account Code -
Forced/Verified
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURE
Features and Specifications Manual
The Account Code - Forced/Verified feature forces selected station users to
dial an Access Code and a verified Account Code before making an
outgoing call. The outgoing call is processed only after the Dialled Account
Code is verified. This feature allows a system administrator to control
unauthorised outgoing calls. The Forced/Verified Account Code is part of
the Station Message Detail Recording (SMDR) call record. The maximum
number of digits for an Account Code is 13.
Terminal Type
All Terminals.
Required Components
MIFM-U( ) ETU
To enter a Forced/Verified Account Code from any station:
1. Lift the handset; receive internal dial tone.
2. Dial the Forced Account Access Code _______. (not assigned at
default). A second dial tone is received.
3. Dial the Forced Account Code _______. Internal dial tone is received.
4. Dial the Trunk Access code and the outside number.
To program Forced/Verified Account Code from Attendant Position:
1. Lift the handset; receive internal dial tone.
2. Dial the Forced Account Access Code (not assigned at default). A
second dial tone is received.
3. Dial the Forced Account Number (
4. Dial the Forced Account Code (default: 4 digits). Confirmation tone is
received.
N
5. Press to enter the information. The next Account Number is
displayed. (Repeat steps 4 ~ 5 until all desired Account Codes
are entered.)
P
6. Press to finish entering Account Codes.
A-3
~
00A E00
).
A3 – 19