NEC Xen IPK Features & Specifications Manual page 156

July 2003
146 – C5
Caller ID Information Operation on display telephone with Softkeys:
1. Dial the XenMail extension.
2. During message playback, XenMail displays Caller ID name and/or
number only depending on system programming. To change display
between Name and Number, press
V
press (CID) Softkey.
K
Dial during message to stop playback, save the current message
as an old message, and hear Caller ID number only.
K
Note:
When
J
dial to skip to the end of the number.
3. During playback, using a mailbox that allows the option, press the
V
(MORE) Softkey three times then press the
return the call.
4. To end a Return Call, press the
mailbox and disconnect the outside call.
Caller ID Information operation from telephone outside the system:
1. Call the number that takes you to the main greeting of the XenMail
system.
2. While main greeting is playing, dial
extension to take you to the mailbox. Enter security code if prompted.
3. Follow prompts to listen to new, old, or archived voice mail messages.
4. When Caller ID information is available, XenMail prompts to hear
Caller ID number only after message playback.
K
Dial during message to stop playback, save the current message
as an old message, and hear Caller ID number only.
5. When Caller ID information is available, the system prompts the
mailbox user with an option to return the call after the Caller ID
number is played.
During message playback dial
Note: To repeat the Caller ID number during playback, dial
the end of the Caller ID number dial
6. To end a Return Call, dial
disconnect the outside call.
V
- OR -
L
is dialled, you can dial
V
(END) Softkey to return to the
- OR -
- OR -
LK
LKJ
NEC Business Solutions Ltd
(MORE) Softkey twice then
to repeat the Caller ID number or
V
(CALL) Softkey to
I
, by default, and your
,
L
. To skip to
J
.
to return to the mailbox and
Caller ID Call Return