NEC Xen IPK Features & Specifications Manual page 524

July 2003
SERVICE
CONDITIONS
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Telephone Type Assignment
+BS
¶
Station Number Assignment
+BS
When the system is at default this Memory Block must be programmed for the feature to be used.
516 – S7
To transfer an outside call or internal call with a call in progress:
1. Press the hookswitch momentarily, and receive second dial tone.
2. Dial the station number where call is to be transferred.
3. Hang up.
To access the feature:
1. Lift the handset, and receive internal dial tone.
2. Dial the applicable Feature Access Code.
Data Assignment
The station must be specified as an SLT in System Programming.
Restrictions
Message Waiting LED is not supported.
SLT(1)-U(
mail system.
General
A maximum of 7 SLT(1)-U( ) ADP units can be used in the Xen
IPK system.
Dial Pulse and Dual-Tone Multifrequency Single Line Telephones
are supported.
System Data Name
) ADPs do not support the connection of a voice
Memory
Block
7-2
4-10
NEC Business Solutions Ltd
1-8-07
Attendant
Function
Page-Line
Key
1-8-08
Station
Page-Line
Key
SLT Adapter