Remote Programming - NEC Xen IPK Features & Specifications Manual

Remote Programming

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
RELATED
FEATURES LIST
Features and Specifications Manual
Remote Programming provides a method to modify and save all system
parameters from a remote location using a modem. This is a variation of the
Maintenance Access Terminal (MAT) PC Programming, and additional
software other than PC Programming is not required.
Terminal type
Not Applicable.
Required Components
PC with MAT PC Programming and modem installed at the remote location.
MIFM-U( ) ETU
MIF-Modem Unit mounted on the MIFM-U( ) ETU or an external modem
connected to the MIFM-U( ) ETU through COM1.
Refer to PC Programming Section of the Xen IPK System
Programming Manual.
General
The MIFM-U( ) ETU must be installed in S1 or S2 of the first B64-U( ) KSU
when the MIF-Modem Unit is installed.
Feature
Number
P-2 PC Programming
R-4
Feature Name
R4 – 487