NEC Xen IPK Features & Specifications Manual page 328

July 2003
SERVICE
CONDITIONS
318 – F1
To program the Feature Access key for a dial code feature:
T
1. Press .
Q
2. Press .
3. Press the Feature Access key.
4. Dial .
A
5. Dial the feature code
T
6. Press .
To program a Feature Access key for a Feature key + code feature:
T
1. Press .
Q
2. Press .
3. Press the Feature Access key.
Lis used to indicate
4. Dial L . (
5. Dial the Feature Access Code.
T
6. Press .
Data Assignment
Feature Access keys and One-Touch keys are similar in purpose and
ability. Up to 16 feature access keys are available depending on
system programming. Unused Line keys can be assigned as Feature
Access keys. One-Touch key availability is controlled by the type of
Multiline Terminal.
General
Line keys, not used for CO/PBX line access, may be assigned
as Feature Access keys in System Programming. The user
can then program the Feature Access keys for Speed Dial, DSS/
BLF, and selected features (e.g., Call Pickup, Paging, DND set, and
DND cancel).
Each Feature Access key can store up to 16 digits.
NEC Business Solutions Ltd
T
to the Xen IPK system.)
Feature Access – User Programmable