Dial 9 For Attendant - NEC Xen IPK Features & Specifications Manual

Dial 9 For Attendant

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Stations can access a system Attendant Position by dialling 9.
Terminal Type
All terminals.
Required Components
None.
To use this feature from a Multiline Terminal:
1. Lift the handset or press
I
2. Dial to call the Attendant (set at default).
3. Lift the handset to talk with Attendant.
To use this feature from a Single Line Telephone:
1. Lift the handset, and receive internal dial tone.
I
2. Dial to call the Attendant (set at default).
3. Talk with the Attendant.
General
Any station can be called by dialling 9 (default: All stations call
station 100).
The Attendant can also be called by dialling the applicable
station number.
The system can have multiple Attendants. Only one can be called by
dialling 9. If that Attendant dials 9, an error tone is received.
When dialling a busy Attendant and receiving call waiting tone, the
Step Call feature can be used to advance to an idle station.
P
and receive internal dial tone.
D-4
D4 – 239