Programming From Multiline Terminal - NEC Xen IPK Features & Specifications Manual

Programming from
Multiline Terminal
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Card Interface Slot Assignment
+BS
¶
Telephone Type Assignment
+BS
Features and Specifications Manual
System Programming can be performed from designated Multiline
Terminals (with an LCD) connected to the first two ESI(8)-U( ) ETU ports.
Some programming changes can be entered while the system is operating,
other programming changes occur when the affected telephones and
circuits are idle.
Terminal Type
Multiline Terminals (with LCD).
Required Components
ESIB(8)-U( ) or ESIE(8)-U( )ETU
Refer to the Xen IPK System Programming Manual for additional
information.
The first two Multiline Terminal ports are programming positions
(default: Stations 100 and 101).
Both stations can go off-line at the same time to program the system.
When PC Programming is being used with the system, programming
from a Multiline Terminal cannot be performed. When programming
from a Multiline Terminal is being performed, PC Programming cannot
be performed.
System Data Name
Memory
Function
Block
7-1
7-2
P-10
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
P10 – 471