NEC Xen IPK Features & Specifications Manual page 359

Xen IPK
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Hold Recall Time Selection (Non-Exclusive Hold)
+BM
¶
Hold Recall Time Selection (Exclusive)
+BM
¶
Hold/Transfer Recall Display Selection
+BTM
Features and Specifications Manual
Hold Recall
Provides a timed reminder to the user that a call was placed on hold.
When a held line recalls, Multiline Terminals equipped with an LCD
receive the following information: the upper LCD line shows the
recalling outside line number, the lower LCD line shows the station
number the call was held at and the station number where the call was
transferred (used for recalling Ring Transfer or Camp-On calls).
Non-Exclusive Hold, Ring Transfer, Hold Recall, Call Park System,
and Attendant Ring Transfer/Camp-On have separate Recall Timers.
For Multiline Terminals, internally held calls do not recall.
A Recall Tone is provided when the handset is on-hook. Off-key
ringing is not provided if the handset is off-hook.
Single Line Telephone
If the user goes on-hook during Exclusive Hold, a recall immediately
follows.
When a line is holding on a Multiline Terminal, the red LED is steadily
lit until the Exclusive Hold Recall Timer expires.
The System Call Park feature can be used to put calls on hold.
System Data Name
Features and Specifications Manual
Memory
Function
Block
1-1-03
1-1-63
4-30
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
H5 – 349