NEC Xen IPK Features & Specifications Manual page 592

July 2003
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Trunk-to-Trunk Transfer Yes/No Selection
+BCT
¶
Class of Service (Station) Feature Selection 2
+BTS
¶
Station to Class of Service Feature Assignment
+BTT
¶ Tandem Transfer Automatic Disconnect Time
+AT
Selection
When the system is at default this Memory Block must be programmed for the feature to be used.
584 – T6
If a Trunk-to-Trunk Transfer is established using Call Appearance
keys, they stay lit until the trunks are released.
When the system is operating in ID mode (Memory Block 1-5-23 = ID),
to ensure Trunk to Trunk transfer calls indicate correctly in the SMDR
records, you must apply one of the following:
1. In MB 1-9-00, assign 999 to an unused ID number.
2. In MB 1-4-04, enter one of the ID numbers you have assigned in
MB1-9-00.
Note that if the Trunk Transfer is completed before the outgoing call is
answered (or the call duration timer has started), the SMDR records
will show the EXT or ID number assigned in MB 1-4-04, not the EXT or
ID number of the station transferring the call.
System Data Name
NEC Business Solutions Ltd
Memory
Function
Block
3-04
1-8-08
4-17
1-4-00
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
3-5
Trunk-to-Trunk Transfer