D-8 Direct Inward Dialling (Did) - NEC Xen IPK Features & Specifications Manual

Xen IPK
RELATED
FEATURES
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Card Interface Slot Assignment
+BS
¶
Trunk Type Selection
+BCT
¶
Trunk-to-Trunk Group Assignment
+BCT
¶
Trunk Name/Number Assignment
+BCT
¶
Access Code (1-, 2-, or 3-Digit) Assignment
+BA
When the system is at default this Memory Block must be programmed for the feature to be used.
Features and Specifications Manual
COI/COID Mode
Sixty-four trunks (Loop Start, E&M Tie Lines, and DID Trunks) can
be installed in a Xen IPK Expanded system, or 16 trunks in a Xen IPK
Basic system.
Feature
Number
C-21 CO/PBX, Tie Line Digit Restriction
D-8 Direct Inward Dialling (DID)
E-3 E&M Tie Lines (4-Wire)
L-5 Loop Start TrunksLoop Start Trunks
U-2 Uniform Numbering Network
System Data Name
Features and Specifications Manual
Feature Name
Memory
Function
Block
7-1
3-91
3-03
3-00
1-1-46/47/
101~ 132
48
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
V3 – 617