NEC Xen IPK Features & Specifications Manual page 538

July 2003
SERVICE
CONDITIONS
530 – S12
To use a Feature Access or One-Touch key programmed for System
Speed Dial from a Multiline Terminal:
1. Press the desired Feature Access or One-Touch key.
To use a System Speed Dial buffer from a Single Line Telephone:
1. Lift the handset, and receive internal dial tone.
2. Dial the Speed Dial Access Code (default:
3. Dial the System Speed Dial buffer number (use
000 III
~
4. Talk with called party.
Data Assignment
Class of Service assignment allows station users to program System
Speed Dial buffers.
The 80 or 1000 System Speed Dial mode is Assigned in System
Programming.
In System Programming, System Speed Dial access is allowed or
denied per tenant/per System Speed Dial block assignment. Using 80
System Speed Dial mode, blocks have groups of 10 buffers. When
using 1000 System Speed Dial mode, the blocks are divided by groups
of 100 buffers.
When using 1000 System Speed Dial mode, buffers 900~999 cannot
be restricted from any tenant.
System Speed Dial blocks can be shared by one or more tenants.
In System Programming, System Speed Dial can be assigned to
override Code Restriction per Code Restriction Class.
General
One thousand System Speed Dial buffers (000~999) are available
when no Station Speed Dial buffers are assigned.
A maximum of 24 digits can be programmed into a System Speed
Dial buffer.
A name can be entered with the number to be dialled when
programming a System Speed Dial buffer. The name is displayed
when the Speed Dial buffer is used.
A maximum of 13 characters using 80 System Speed Dial mode or 12
characters using 1000 System Speed Dial mode can be entered for
the name.
NEC Business Solutions Ltd
J
.
).
00 GI
~
Speed Dial – System
or