NEC Xen IPK Features & Specifications Manual page 174

July 2003
RELATED
FEATURES LIST
164 – C8
General
If a station with Call Forward assigned receives a second call, and Call
Forward is set to a busy station, the second incoming call does not
follow the forwarding assignment unless the forwarding station
becomes idle.
The Call Forward - All Calls set and cancel Access Codes can be
programmed on separate Feature Access or One-Touch keys. A line
key defined in system programming as Call Forward - All Calls set
lights when Call Forward - All Calls is set. The Feature key LED
flashes when Call Forward - All Calls is set.
All internal and transferred calls to the station follow the Call Forward -
All Calls setting.
Tie/DID and DIT/ANA line calls follow Call Forward - All Calls setting.
A station can be the destination of any number of Call Forward - All
Calls settings.
When the station user sets this feature, the associated red LED winks
on any DSS/BLF key assigned for that station.
The destination station is the only station that can call a station with
Call Forward - All Calls set.
Call Forward - All Calls has higher priority than Call Forward Busy,
Call Forward - No Answer, or Call Forward - Busy/No Answer.
Secondary Incoming Extensions cannot be set for Call Forward - All
Calls.
When Call Forward - All Calls is set, no indication is displayed in the
LCD (if equipped) of the Multiline Terminal where Call Forward - All
Calls was set.
Call Forward Split feature allows internal calls and external calls to be
forwarded to different destinations.
Feature
Number
C-9 Call Forward - Busy/No Answer
C-11 Call Forward - Off-Premise
C-12 Call Forward - Split
NEC Business Solutions Ltd
Feature Name
Call Forward - All Calls