NEC Xen IPK Features & Specifications Manual page 484

July 2003
SERVICE
CONDITIONS
476 – Q1
To quickly transfer a call to voice mail during an intercom call
1. Make the intercom call.
2. Dial the Quick Transfer Access Code (default:
3. Leave a voice mail message.
4. Hang up.
Data Assignment
A Voice Mail Master Number must be assigned in Memory Block
1-8-26 in System Programming.
Restrictions
The Quick Transfer to Voice Mail is not allowed when caller is:
Listening to the busy tone (BT)
Talking on an internal line
Talking on an outside line
During a Broker's call
Conference call
After setting Automatic Callback
General
The Quick Transfer to Voice Mail feature is allowed when:
Listening to the ring back tone (RBT)
Listening to the call waiting tone (CWT)
In Handsfree Answerback Mode
In Voice Over Mode
This feature is allowed from a Single Line Telephone until the PBR
times out (default: 10 sec).
When Quick Transfer to Voice Mail is accessed, the Voice Over
feature is cancelled.
While on an intercom (ICM) call, automatically transfer to that station
Voice Mail box by dialling the Quick Transfer Access Code (default 7).
When Quick Transfer to Voice Mail is accessed, the Live Recording
feature is cancelled.
DTR Multiline terminals that have separate "Message" button, will
access extension programmed in Memory Block 1-8-26.
NEC Business Solutions Ltd
G
).
Quick Transfer to Voice Mail