NEC Xen IPK Features & Specifications Manual page 282

July 2003
RELATED
FEATURES LIST
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Access Code (1-, 2-, or 3-Digit) Assignment
+BA
¶
Line Key Selection for Telephone Mode
+BTM
¶
Attendant Add-On Console Key Selection
+BTD
272 – D11
Restrictions
All Internal/External Page Access cannot be programmed to a key on
the Attendant Add-On Console.
General
If a Direct Paging Access key for All Internal Zone or Internal Zone
Page on the Attendant Add-On Console is pressed, a paging
announcement is made over the speakers of all idle Multiline Terminals
programmed in a zone.
Paging access through external speakers is available if a system has
external speakers. An optional ECR-U( ) ETU is required for External
Zone Paging.
Single Line Telephone users can access Internal and External Paging
and Meet-Me by using an Access Code, but cannot receive a paging
announcement.
Feature Access and One-Touch keys on Multiline Terminals can be
assigned for any type paging allowed in System Programming. This
includes the paging features listed previously and All Internal Call
Paging, Internal/External Paging, and specific Tenant Internal Paging.
Feature
Number
A-8 Answer Hold
E-6 External Zone Paging (Meet-Me)
I-6 Internal Zone Paging (Meet Me)
System Data Name
NEC Business Solutions Ltd
Feature Name
Memory
Function
Block
1-1-46/47/ 070 ~079,
48 081
4-12
1-6-05
1-8-07 1-8-08
Attendant Station
Page-Line Page-Line
Key Key
Direct Paging Access