Chapter 2 Introduction; Section 1 General Information; Section 2 Multiline Terminals Used With The System - NEC Xen IPK Features & Specifications Manual

Introduction
S 1
E C T I O N
G
ENERAL
I
NFORMATION
S 2
E C T I O N
M T
ULTILINE ERMINALS
U W T
SED ITH HE
S
YSTEM
Features and Specifications Manual
term
D Series i (DTR telephones) and DTU-type multiline telephones can be
used with the Xen IPK system.
Dterm Series i Multiline Terminals
term
The D Series i Multiline Terminals offer a variety of colours, display and
non-display and line sizes.
Two colours are generally available: black and white.
Two display types: with LCD and without LCD. The large Liquid Crystal
Display (LCD) on the display terminals provides call status data and
programming information.
Four line sizes: 2-line, 8-line, 16-line and 32-line.
Speakerphones with full handsfree operation and headset jacks are
standard (headset jack not available on the DTR-2DT-1A).
All but the DTR-2DT-1A are compatible with the AD(A)-R( ), AP(A)-
R( ), AP(R)-R( ), CT(A)-R( ) Unit and CT(U)-R( ) Unit adapters. The
AP(R)-R( ) Unit requires an ACA-U( ) Unit to supply AC power. The
DTR-2DT-1A has an internal Analogue Port without ringer.
An Attendant Add-On DCR-60-1A CONSOLE is available with 60
station and/or outside line assignments and 12 function keys.
Two-line terminal with two Flexible Line keys (each with 2-colour LED),
nine function keys, built-in speakerphone, a large LED to indicate
incoming calls or messages, and an outgoing only Analogue Port for
connecting a modem.
Chapter 2
Chapter 2 – 5