Simple Operation By Menu Key And Cursor Key - NEC Univerge SV9100 User Manual

1.
UT880
(NEC UT880 Multiline Smart Phone))
(20)
(15) (14) (16)
(1) Call Indicator Lamp
The lamp at the top corner of the UT880 NMLT
Display flashes when a call terminates to the
terminal, or when a message has been left. On the
SV9100, this lamp flashes fast when a call
terminates to the terminal and flashes slower
when a message has been left.
(6)
(1)
(13)
(3) (4)
(17) (18)
(2) Programmable Keys
These keys can be programmed as Flexible Line key
Programmable Feature Key by WebPro/ PCPro
PhonePro.
(3) Recall Key
Press the key to finish an outside call and hear the dial
(2)
tone. With Centrex trunks, press the recall key to hook
flash the line.
(8)
(5)
(4) Feature
Used to activate any features as terminal setup
(7)
functions.
(9)
(12)
(5) Client Display Window (CDW)
Client Display provides UT880 Series activity
information plus data, time and Softkey Operation.
The display on UT880 has 24-character/28-character,
3-line capability.
(11)
(10)
(6) Exit
The user can exit from a screen mode by pressing this
key.
(19)
(7) Softkeys
Any feature shown at the bottom of the LCD is
available. The appropriate feature key is displayed on
the screen according to the call handling process.
(8) Help
The user can press this key followed by a
programmable key to check what Line or
Programmable Feature is programmed on the key.
24