Conference; Conference Bridge - NEC ElectraElite IPK User Manual

C
ONFERENCE
With an internal call in progress:
Press Hookswitch.
Place second call (internal or outside).
Announce conference.
Press Hookswitch to establish conference.
Note:1 Repeat above procedure to add a fourth party.
Note:2 No more than 1 outside party can participate in a conference.
Note:3 A conference may be placed on Hold by pressing Hookswitch. Replacing the
handset will cause the conference call to ring your telephone.
C
ONFERENCE
Start a conference call from an internal extension:
Call a Conference Bridge extension.
When the voice prompt is heard, enter the password and press
Start the conference call.
Start a conference call from an off premise location:
Call a line that is directed to the Conference Bridge.
When the voice prompt is heard, enter the password and press #.
Start the conference call.
Start a conference call from an incoming CO call using an Automated
Attendant:
Call an outside line that is answered by an Automated Attendant.
Dial the extension of the Conference Bridge.
When the voice prompt is heard, enter the password and press #.
Start the conference call.
B
RIDGE
5
#
.