Account Code - Forced/Verified/Unverified - NEC UNIVERGE SV8100 Features & Specifications Manual

Account Code – Forced/Verified/Unverified
Description
Account Codes are user-dialed codes that help the system administrator categorize and/or
restrict trunk calls. The system has two types of Forced Account Codes:
Forced Account Codes (Unverified)
Forced Account Codes require an extension user to enter an Account Code every time
they place a trunk call. If the user does not enter the code, the system prevents the call.
As with Account Codes, the extension user can elect to enter an Account Code for an
incoming call. However, the system does not require it.
Once set up in system programming, you can enable Forced Account Codes on a
trunk-by-trunk basis. In addition, Forced Account Codes can apply to all outside calls or
just long distance calls. Forced Account Codes for Toll Calls restricts calls according to
the following chart:
Number of Digits
Dialed
1~3
4~7
1
More than 7
800 and 888
011 (International)
911
1
If you change the local call length in Toll Restriction, this value changes accordingly.
Verified Account Codes
With Verified Account Codes, the system compares the Account Code the user dials to
a list of up to 2000 pre-programmed codes. If the Account Code is in the list, the call
goes through. If the code dialed is not in the list, the system prevents the call. Verified
Account Codes can have 3~16 digits using the characters 0~9 and
programming, you can use "wild cards" to streamline entering codes into system
Account Code – Forced/Verified/Unverified
If first digit is not 1
Not allowed
Allowed – does not require
Account Code
Allowed – requires Account Code
Allowed – requires Account Code
Allowed – requires Account Code
Allowed – does not require
Account Code
If first digit is 1
Not allowed
Allowed – requires Account Code
Allowed – requires Account Code
Allowed – does not require
Account Code
N/A
N/A
. During
#
A
1 - 3