User Aware Login Example; Figure 413 Web Configurator For Non-Admin Users; Table 197 Object > User/Group > Setting > Add/Edit - ZyXEL Communications ZyWALL USG 300 User Manual

Unified security gateway

Hide thumbs Also See for ZyWALL USG 300:

Table of Contents

The following table describes the labels in this screen.

Table 197 Object > User/Group > Setting > Add/Edit

Authentication

Source Address

36.4.2 User Aware Login Example

Access users cannot use the Web Configurator to browse the configuration of the ZyWALL.

Instead, when access users log in to the ZyWALL (forced in the screen as shown in

ZyWALL USG 300 User's Guide

Select this if you want this condition to be active.

Enter a description for this condition. It can be up to 60 printable ASCII characters

Select whether users must log in (force) or whether users do not have to log in

(skip) when this condition is checked and satisfied.

Select a source IP address object or select Create Object to configure a new one.

Select any if this condition applies to traffic from all source addresses.

Select the destination address of traffic to which this condition applies or select

Create Object to configure a new one. Select any if this condition applies to traffic

from all destination addresses.

Select the schedule object that specifies when this condition applies or select

Create Object to configure a new one (see

Select none if this condition always applies.

Select this to save your changes and return to the previous screen.

Select this to return to the previous screen without saving any changes.

or otherwise), the following screen appears.

Chapter 36 User/Group

Chapter 39 on page 601

for details).