Pbr Clear And Show Commands - Enterasys X-Pedition XSR CLI Cli Reference Manual

PBR Clear and Show Commands

set interface
This command specifies an XSR interface as the forwarding port for Policy Based Routing.
Syntax
set interface interface-num
interface-num
Syntax of the "no" Form
The no command deletes the specified set clause:
no set interface interface-num
Mode
PBR Map configuration:
Example
The following example sets F1 as the forwarding interface:
XSR(config-pbr-map)#set interface FastEthernet 1
PBR Clear and Show Commands
clear ip pbr-cache
This command deletes entries from the PBR cache table.
Syntax
clear ip pbr-cache
Mode
EXEC configuration:
show ip pbr-cache
This command displays the PBR cache that has been built up for fast traffic flow.
Syntax
show ip pbr-cache
Mode
EXEC configuration:
Sample Output
The following is sample output when the command is issued:
5-148 Configuring the Internet Protocol
Interface number.
XSR(config-pbr-map)#
XSR>
XSR>