Aaa Debug And Show Commands - Enterasys X-Pedition XSR CLI Cli Reference Manual

AAA Debug and Show Commands

Syntax of the "no" Form
The no form of this command removes the user/group/interface restriction:
no aaa privilege
Mode
Interface configuration:
Default
Privilege level: 15'
Example
This example resets the privilege level to 10 on GigabitEthernet interface 2:
XSR(config-if<G2>)#aaa privilege 10
AAA Debug and Show Commands
debug aaa
This command activates/deactivates the output of AAA debugging data, which is classified by
Authentication, Accounting and Authorization categories.
The command's output will be sent to the terminal that most recently requested debug
information. Also, if multiple AAA debug messages are activated, all debug data will be sent to
the terminal from which it was most recently activated.
Syntax
debug aaa {accounting | authentication | authorization}
accounting
authentication
authorization
Syntax of the "no" Form
The no form of this command resets to the default value:
no debug aaa {accounting | authentication | authorization}
Mode
Privileged EXEC:
Sample Output
The debug authorization message below indicates the Local method was successful with MSCHAP:
Local::queue(test)
16-112 Configuring Security
XSR(config-if<xx>#
Accounting debug data displayed.
Authentication debug data displayed.
Authorization debug data displayed.
XSR#