Table of Contents
Advertisement
show interface atm
This command displays the running configuration and statistical details for an ATM interface.
Statistics supported by the ADSL interface are hardware dependent. General categories include
the following:
•
Analog details including upstream and downstream bit rates
•
ATM cell counters (especially OAM cells)
•
OAM (circuit UP/DOWN) state
•
Frame (AAL5) counters
•
Layer state information
•
VC table
•
Administrative state (Enabled/Disabled)
•
Operational state (Up/Down)
•
Loopback on
•
DSP firmware
•
Backup interface
•
Description string
When you issue the command to display sub‐interface statistics, the output returned includes:
•
VPI/VCI
•
IP address (value + configured or negotiated)
•
Encapsulation method
•
Administrative state (enabled/disabled)
•
Operational state (Up/Down)
•
PPP state information (PPPoE ‐ host name/service name)
•
Description string
•
VPN information
Syntax
show interface atm {slot/card/port.sub-interface}
slot
card
port
sub-interface
Mode
EXEC or Privileged EXEC:
The XSR slot number, ranging from 0 to 2.
The XSR NIM number, ranging from 1 to 2.
The XSR slot number: 0.
Identifies a sub‐interface on that interface, ranging from1 to 30.
XSR>
or
XSR#
ATM Clear and Show Commands
XSR CLI Reference Guide 13-107
Advertisement
Table of Contents
