Router Rip - Enterasys X-Pedition XSR CLI Cli Reference Manual

RIP Commands
Syntax of the "no" Form
The no form of this command cancels the redistribution of routes:
no redistribute from_protocol [metric metricvalue]
Mode
Router configuration:
Default
Disabled
Examples
This example redistributes static routes from 5 hops away into RIP:
XSR(config-router)#router rip
XSR(config-router)#redistribute static 5
This example redistributes intra, inter and external OSPF routes into RIP:
XSR(config-router)#redistribute ospf match internal match external
The following example imports all OSPF routes into RIP with the default RIP metric of 1. It is
equivalent to the command entered earlier.
XSR(config-router)#redistribute ospf

router rip

This command enables/disables the Routing Information Protocol (RIP).
Syntax
router rip
Syntax of the "no" Form
The no form of this command disables RIP on the XSR:
no router rip
Mode
Global configuration:
Next Mode
Router configuration:
5-134 Configuring the Internet Protocol
XSR(config-router)#
Notes: The XSR supports a total of 750 RIP routing entries with 64 MBytes of memory installed.
RIP commands configured under Interface mode are independent of enabling/disabling the RIP
protocol.
XSR(config)#
XSR(config-router)#