Enterasys X-Pedition XSR CLI Cli Reference Manual page 266

Network Address Translation Commands
NAPT using address: 10.10.10.2
Num translations: 8
---------------------------------------
Pro
UDP
UDP
UDP
UDP
TCP
TCP
TCP
TCP
The following example displays NAT pool entries with overload statistics. Note that a unique
NAT IP address is assigned to each internal host and that if there are more internal hosts than the
number of addresses in the pool, then multiple internal hosts will share a single NAT address..
XSR#show ip nat translations
Pool name: NATPool with overload
ACL Number: 100
---------------------------------------
NAPT using address: 10.10.10.131
Num translations: 2
---------------------------------------
Pro
UDP
UDP
Parameter Description
Pro
Private Host
NAT Addrl
External Host
Idle
5-190 Configuring the Internet Protocol
Private Host
(Local IP Addr)
192.168.50.90:1024
192.168.50.90:1024
192.168.50.91:1024
192.168.50.91:1024
192.168.50.70:1024
192.168.50.70:1024
192.168.50.71:1024
192.168.50.71:1024
Private Host
(Local IP Addr)
192.168.50.91:1024
192.168.50.91:1024
Protocol of the port identifying the address.
The IP address assigned to a host on the inside network.
The legitimate IP address.
Remote host that the packets are destined to.
Period (seconds) of inactivity of a traffic flow.
NAT Addr
(Global IP Addr)
10.10.10.2:20002
10.10.10.2:20001
10.10.10.2:20004
10.10.10.2:20003
10.10.10.2:20006
10.10.10.2:20005
10.10.10.2:20008
10.10.10.2:20007
NAT Addr
(Global IP Addr)
10.10.10.131:20002
10.10.10.131:20001
External Host Idle
10.10.10.15:3664
10.10.10.15:3663
10.10.10.16:3666
10.10.10.16:3665
10.10.15.75:36864
10.10.15.75:36863
10.10.15.76:36866
10.10.15.76:36865
External Host
10.10.10.16:3666
10.10.10.16:3665
24
24
24
24
3
3
3
3
Idle
4
4