AAA Method Commands
•
client
page 16‐106 for the command definition.
enable -
•
command definition.
•
group -
definition.
hash enable -
•
command definition.
•
key -
daemon running on a RADIUS server. Refer to page 16‐108 for the command definition.
qtimeout -
•
retransmit -
•
to page 16‐109
•
timeout -
retransmitting. Refer to page 16‐110 for the command definition.
Syntax
aaa method {local | radius | pki} method-name [default]
local
radius
pki
method-name
default
Syntax of the "no" Form
Use the no form to delete the AAA method and restore the default:
no aaa method {local | radius | pki} method-name
Default
If the default is not specified, the local method is the default for AAA service and subsystems
lacking their own default.
Mode
Global configuration:
Next Mode
AAA Method configuration:
Example
This example sets RADIUS method sbr as the default for AAA service:
XSR(config)#aaa method radius sbr default
16-102 Configuring Security
‐ Configures the default AAA method (plug‐in) for each client service. Refer to
Enables the current AAA server for RADIUS. Refer to page 16‐106 for the
Specifies the name of an existing group. Refer to page 16‐107 for the command
Enables the hash algorithm used for RADIUS. Refer to page 16‐108 for the
Sets the authentication and encryption key used between the XSR and the server
Specifies the queue timeout. Refer to page 16‐109 for the command definition.
Specifies the number of AAA RADIUS server requests sent to a server. Refer
for the command definition.
Sets the interval the XSR waits for the AAA RADIUS server to reply before
Local AAA method.
RADIUS method. You must set a RADIUS server type.
PKI method.
Designation of the AAA method (plug‐in).
If the keyword is set, the method is DEFAULT, unless overridden on a
per‐service basis by the
XSR(config)#
XSR(aaa-method-xx)#
client
sub‐command.