Enterasys X-Pedition XSR CLI Cli Reference Manual page 39

Default
0 traps (unlimited)
Example
The following example sets the traps permitted to 1000:
XSR(config)#snmp-server max-traps-per-window 1000
snmp-server min-trap-spacing
This command sets the interval between successive SNMP traps. Trap spacing is only guaranteed
to occur at least every spacing ‐ it might occur more often. The command implementation can
exhibit a jitter of +0 to +200 milliseconds and is linked to the XSR's fast timer tick interval.
Syntax
snmp-server min-trap-spacing spacing
spacing
Syntax of the "no" Form
The no formsets the minimum interval between successive traps to the default value:
no snmp-server min-trap-spacing
Mode
Global configuration:
Default
200 milliseconds
Example
The following example limits the minimum trap interval to 1 minute:
XSR#snmp-server min-trap-spacing 60000
snmp-server packetsize
This command sets the maximum allowable incoming and outgoing packet size in bytes. Packets
larger than this value are dropped.
Syntax
snmp-server packetsize size
size
Minimum interval between successive traps, ranging from 0 to 3,600,000
milliseconds. Zero (0) indicates traps are sent successively, without delay.
XSR(config)#
Peak packet size allowed, ranging from 484 to 8,192 bytes.
snmp-server Commands
XSR CLI Reference Guide 1-25