ATM Clear and Show Commands
Parameters in the Sub-Interface Response
DSP Image File: CFlash:adsl.fls
DSP Image Rev.: 43e2ea93
DMT state: 42
OAM counters/ UNK counters
Cells:
total_count/ tx_notready/tx_toomany
Packet Processor Tx Scheduler Stats
952 Packet driver Tx OK
0 Packet driver not Tx: MUX END_ERR_BLOCK
0 Packet driver not Tx: MUX ERROR
0 Packet driver not Tx: Unknown Msg from MUX
ATM Sub-interface Statistic Counters:
Rx PacketTotalCount
Rx PacketDiscardCount
Rx MuxHeaderError
Rx SnapHeaderError
Rx PPPoEethTypeError
Rx PPPoEethTypeARP
Rx PPPoEethTypeIP
Rx PPPoEethTypeRARP
Tx PacketTotalCount
Tx PacketDiscardCount
ATM Data Object Stats
VPI/VCI 1/32
ccRx2 987 through
tx_no_showtime_loop 0
13-106 Configuring ADSL
Name of the file containing the DSP image.
Vendorʹs revision of the DSP image.
Current operational state of the DSP.
Sub‐set of the interface table input and output counters for the
OAM and unconfigured channels on the ATM interface. Refer
to RFC‐1213 for parameter descriptions.
Detailed OAM cell totals for receive and transmit counters.
Internal chipset debug counters.
Sum of packets received.
Sum of packets received that were discarded because of an error.
Sum of packets received that were discarded due to an error in the VC
Multiplexing encapsulation header.
Sum of packets received that were discarded due to an error in the LLC/SNAP
encapsulation header.
Sum of PPPoE packets received that were discarded because the Ethernet type
is unsupported.
Sum of PPPoE packets received that were discarded because the Ethernet type
ARP is unsupported.
Sum of PPPoE packets received that were discarded because the Ethernet type
IP is unsupported.
Sum of PPPoE packets received that were discarded because the Ethernet type
RARP is unsupported.
Sum of packets transmitted.
Sum of transmit packets discarded for any reason.
Internal data plane status information.
Virtual Path Index and Virtual Circuit Index for the ATM PVC.
Driver internal debug counters.
Sum of packets transmitted.
Sum of failed transmit attempts due to the driver
returning an END_ERR_BLOCK status.
Sum of failed transmit attempts due to the driver
returning an ERROR status.
Sum of failed transmit attempts due to the driver
returning an unknown error status.