Show Ip Irdp - Enterasys X-Pedition XSR CLI Cli Reference Manual

Inbound access list

show ip irdp

This command displays ICMP router discovery settings.
Syntax
show ip irdp
Configuration Mode
EXEC or Global configuration:
Sample Output
The following is sample output:
XSR>show ip irdp
FastEthernet1 has router server discovery enabled.
Broadcast address is used.
Advertisements will occur between every 450 and 600 seconds.
Advertisements are valid for 1800 seconds.
Preference will be 100.
Serial 1 has router server discovery disabled
FastEthernet2 has router server discovery disabled
Parameter Description
Broadcast address is
used
Advertisements will
occur between every
450 and 600 seconds
Advertisements are
valid for 1800 seconds
Preference is 100
show ip proxy-dns cache
This command displays the proxy DNS cache.
Syntax
show ip proxy-dns cache
Mode
EXEC:
Indicates whether the interface has an incoming access list set.
Type of addressing used (broadcast or multicast).
Specified minimum and maximum advertising interval for the port.
The configured holdtime values for the interface.
The configured (or in this case default) preference value for the interface.
XSR>
XSR> or XSR(config)#
IP Clear and Show Commands
XSR CLI Reference Guide 5-173