Enterasys X-Pedition XSR CLI Cli Reference Manual page 552

ISAKMP Protocol Policy Mode Commands
Syntax of the "no" Form
The no form of this command resets the value to the default:
no group
Default
Group 2
Mode
ISAKMP protocol policy configuration:
Example
The following example configures Group 5 on ACMEproposal:
XSR(config)#crypto isakmp proposal ACMEproposal
XSR(config-isakmp)#Group5
hash
This command sets the hash algorithm used in an IKE proposal (policy).
Syntax
hash {sha | md5}
sha
md5
Syntax of the "no" Form
The no form this command resets to the default ‐ sha:
no hash
Default
sha
Mode
ISAKMP Protocol Policy configuration:
Example
This example specifies MD‐5 as the hash algorithm to be used for IKE proposal ACMEproposal:
XSR(config)#crypto isakmp proposal ACMEproposal
XSR(config-isakmp)#hash md5
14-98 Configuring the VPN
XSR(config-isakmp)#
Secure Hash Algorithm1 (SHA‐1) hash.
Message‐Digest Algorithm (MD5) algorithm.
XSR(config-isakmp)#