Multilink Show Commands - Enterasys X-Pedition XSR CLI Cli Reference Manual

Multilink Show Commands

Multilink Show Commands
show interface multilink
This command displays multilink interface statistics including MLPPP status for both the bundle
and the member link.
Syntax
show interface multilink [number]
card/port
number
Mode
EXEC:
Sample Output
Thefollowing is sample output for Multilink interface 8:
XSR>show interface multilink 8
********** Multilink Interface Stats **********
Multilink 8: MLPPP is Admin Up / Oper Up
Group Num: 8
LCP
IPCP
Multilink
Multi-Class
Multilink header format is LONG SEQ NUM
Class suspendable level is 5 tx classes and 5 rcv classes
Max Fragment delay is 10 ms
MLPPP Bundle Info:
Control Object state is Admin Down / Oper Down
Multilink PPP has no memberlinks
Data Object state is Admin Down
The adjacent is DOWN and data passing is FALSE
Bundle size is 0
Max Load Threshold: 0
Total Load Bandwidth is 64000 bits/sec
Bundle Stats
Rx: Total
Data
Ctrl
Null
Drop
Rx Load BW Avg
Tx Load BW Avg
8-122 Configuring the Point-to-Point Protocol
The ML interface port for viewing link status, statistics and configuration data.
Logical interfaces.
XSR>
State: OPENED
State: OPENED
State: OPENED
State: OPENED
0, TX: Total
0,
0,
0,
0,
0, Max
0, Max
0
Data 0
Ctrl 0
Null 0
Drop 0
0, Min 0
0, Min 0