Table of Contents
Advertisement
Sample Output
The following is sample output from the command:
XSR>show ip interface
Dialer 0 is Admin Up
Internet address is 1.1.1.1/24
Last change: 11:14 AM
Rcvd:
10245 octets, 1231 unicast packets,
0 discards, 3 errors, 4 unknown protocol
Sent:
11232 octets, 1132 unicast packets,
0 discards, 2 errors
MTU is 1500 bytes
Proxy ARP is enabled.
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound
access list is not set
Router Discovery is disabled
FastEthernet 0 is Admin Up
Internet address is 134.141.235.165/24
Last change: 11:14 AM
Rcvd:
1245 octets, 131 unicast packets,
0 discards, 0 errors, 0 unknown protocol
Sent:
11232 octets, 1132 unicast packets,
0 discards, 2 errors
MTU is 1500 bytes
Proxy ARP is enabled.
Helper address is not set
Directed broadcast forwarding is enabled
Outgoing access list is not set
Inbound
access list is not set
Router Discovery is enabled
FastEthernet 1 is down
Internet address is 134.141.234.2/24
Last change: 11:13 AM
MTU is 1500 bytes
Proxy ARP is disabled.
Helper address is not set
Directed broadcast forwarding is enabled
Outgoing access list is not set
Inbound
access list is not set
Router Discovery is enabled
The following is sample output showing primary and secondary IP addresses:
XSR#show ip interface fastEthernet 2
FastEthernet2 is Admin Up
I nternet address is 51.51.51.1, subnet mask is 255.255.255.0
Internet address is 52.52.52.1, subnet mask is 255.255.255.0 Secondary
Internet address is 53.53.53.1, subnet mask is 255.255.255.0 Secondary
Internet address is 54.54.54.1, subnet mask is 255.255.255.0 Secondary
Internet address is 57.57.57.1, subnet mask is 255.255.255.0 Secondary
IP Clear and Show Commands
XSR CLI Reference Guide 5-171
Advertisement
Table of Contents
