Show Interface - Enterasys X-Pedition XSR CLI Cli Reference Manual

Enterasys security router reference guide
Table of Contents

Advertisement

Parameter Descriptions
Temp IP addr
Temp sub net mask
Temp default-gateway addr
State
DHCP Lease Server
DNS Server
DHCP Transaction ID
Lease/ Renewal/ Rebind
Next timer fires after

show interface

This command displays DHCP interface's IP address and subnet mask. When negotiating, the 
interface will indicate ʺInternet address is not assignedʺ.
Syntax
show interface
Examples
The following example does not display the DHCP assigned address while the protocol is 
negotiating:
XSR#show interface
FastEthernet 1 is Admin Up
Internet address is not assigned
The following example displays the DHCP assigned address when the protocol has finished 
negotiation:
xsr#show interface
FastEthernet 1 is Admin Up
Internet address is 172.16.1.1, subnet mask is 255.255.255.0
IP address assigned via DHCP to the client from the server.
Subnet mask assigned via DHCP to the client from the server.
Default gateway assigned by the DHCP server.
DHCP Client FSM state:
0 ‐ None
1 ‐ REBOOTING
2 ‐ INIT
3 ‐ SELECTING
4 ‐ REQUESTING
5 ‐ BOUND
6 ‐ RENEWING
7 ‐ REBINDING
8 ‐ STOPPED
9 and others ‐ NOTVALID
DHCP server IP address and name.
DNC server IP address.
Transaction ID for current DHCP offer from the server.
Current lease, renewal, and rebind periods.
Timer for the next time DHCP renew request.
DHCP Clear and Show Commands
XSR CLI Reference Guide 15-113

Advertisement

Table of Contents
loading

This manual is also suitable for:

X-pedition xsr

Table of Contents