Enterasys X-Pedition XSR CLI Cli Reference Manual page 611

next-server
This command specifies the server from which the initial boot file will be loaded. The server can
be designated either by IP address or hostname.
Syntax
next-server server [hostname | ip_address]
hostname
ip_address
Syntax of the "no" Form
Use the no form of this command to remove the next‐server:
no next-server server [hostname | ip_address]
Mode
Any of the following command modes are available:
DHCP pool configuration:
DHCP host configuration:
DHCP client class configuration:
Example
The following example specifies the IP address of a next‐server:
XSR(config-dhcp-pool)next-server 192.168.57.4
option
This command configures DHCP server options/extensions. DHCP Server provides a framework
for passing configuration data to hosts on a TCP/IP network. Configuration values and other
control data are carried in tagged data items stored in the options field of the DHCP message.
The data items are also called options or client extensions. The current set of XSR‐supported
DHCP options and BOOTP vendor extensions are described in Table 15‐1 on page
generally in RFC‐2132. Default values are defined in RFC‐1122.
Depending on the client configuration inheritance, the command should be used from the proper
mode. If it is specified from multiple modes, an override mechanism chooses the innermost config
value, with host as innermost, then client‐class and pool as the most general.
Syntax
option code {ascii string | hex string | ip address}
code
ascii string
Designation of the server by name.
Designation of the server by IP address.
XSR(config-dhcp-pool)#
XSR(config-dhcp-host)#
XSR(config-dhcp-class)#
DHCP option code.
An ASCII character string. Strings containing space must be enclosed with quotes.
The following options are set with an ASCII string: 12, 14, 15, 17, 18, 40, 47, and 64.
DHCP Commands
102 and
XSR CLI Reference Guide 15-101