Enterasys X-Pedition XSR CLI Cli Reference Manual page 152

Hardware Controller Clear and Show Commands
show interface dialer
This command displays information about the Dialer interface.
Syntax
show interface dialer [number]
number
Mode
Privileged EXEC or Global configuration:
Sample Output
The following example displays information about Dialer interface 3:
XSR#show interface dialer 3
********** Dialer Interface Stats **********
Dialer3 is Admin Down
Internet address is not assigned
Dialer3
Dialer state is: DOWN
Wait for carrier default: 60, default retry: 3
Dial String
Free pool ISDN channels: <0>
Free pool serial ports:
show interface fastethernet
This command displays information about a FastEthernet interface. This interface is available on
the XSR 1800 Series routers only.
Syntax
show interface fastethernet [number]
number
Mode
Privileged EXEC or Global configuration:
Sample Output
The following is sample output from FastEthernet interface 1:
XSR#show interface FastEthernet 1
FastEthernet1 is Admin Up
Internet address is 51.51.51.1, subnet mask is 255.255.255.0
Internet address is 52.52.52.1, subnet mask is 255.255.255.0 Secondary
Internet address is 53.53.53.1, subnet mask is 255.255.255.0 Secondary
4-100 Configuring Hardware Controllers
Dialer interface number, ranging from 0 to 255.
Success Failures
<0>
FastEthernet interface number of 1 or 2.
XSR# or XSR(config)#
Map Class
XSR# or XSR(config)#